Silicone rectifier rubber holder

[BigAl (Alan)]

Re - Silicone rectifier rubber holder, normally supplied with the main wire harness (example CB750F1)
Would any one know the part number for the rubber holder or a supplier
Picture attached...thanks in advance - Alan

[Oddjob]

Looks more like the clutch safety switch to me Al. See if the 550f lists them separately

[BigAl (Alan)]

Its part of the safety circuit which also involves the clutch switch
DS quotes the 'Rectifier silicone' part No. 31700-124-008 but there is no rubber holder listed on the DS site (CB750F1)
Fitted to a number bikes, but I have only seen them fitted on the main wire harness

Thanks for the reply

[Oddjob]

Have a look at 38301-KJ6-743 looks like it might be suitable

No forget that.

Maybe 38306-107-670

[BigAl (Alan)]

Just googled both numbers...they come up as a Honda indicator/winker relay

[Bryanj]

Do you think the small indicator mount might work 38306 092 670?
The diode one is not shown so must come with loom

[Oddjob]

The lower number shows as the rubber mount for me Al.

Try CMS