front mudguard line up problem

[neat street]

Hi All
The whole bike is now together, but have a problem with the bracket from the mudguard rubbing on the nearside part of the tyre, can anyone give any clues as to whats wrong please,
Many thanks
John

[LesterPiglet]

Guard on backwards? Give us a wider picture.

[SteveD CB500K0]

... and show us the mounting to the caliper bracket...

[neat street]

Thanks for your replies, more pics below, from both sides
Many thanks
John

[MarkCR750]

It' a bit hard to tell from the photo's but can the brackets be bent so that the mudguard sits closer to the tyre, the bend would then give greater clearance between the bracket and the tyre, at present the bracket looks like A, can you joggle it to look like B ?. (apologies photo is upside down)

[LesterPiglet]

What size tyre? Is it actually rubbing? If it doesn't rub don't worry about it as the tyre will only grow in height, not width when its rotating.
Is your brake line pushing against the bracket?
And give us a straight on shot of the wheel/guard.

[Bitsa (Ralph Wright - RIP)]

Hi,
Just checked mine on the brake side you should be able to get your little FINGER down between the guard and the tyre.If you cant you either have a warped guard or your tyre is too dare I say in this day too fat.
Cheers
Bitsa

[LesterPiglet]

Your little what? There's no way mine is fitting in there.   

[neat street]

Thanks for all your help, the tyre size is 100/90/19, so this should not be a problem? my only thought is that when the mudguard went to  chrome (in three bits, top bracket, bottom stay, and mudguard), they bent it somehow?
Any other ideas would be appreciated. many thanks again
John

[LesterPiglet]

100/90x19 is the same as mine so there shouldn't be a problem.

[neilb]

bend it back