SOHC.co.uk Forums > Project Board
1971 CB500K0 Resto 3/71 VIN 1000896
AshimotoK0:
Here is the mudguard off the bike no rot ...shame that it is so cracked :( .
I would rather hang on to see if you can find the NOS one in the loft if you have it Ken. What's the chances you may be able to find it, please?
Does anyone know the difference between the CB500 3 hole and the CB750K1 3-hole rear guard?
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
AshimotoK0:
Removed Bearings (using M12 studded bar and washers as extractor).. Degreased in paraffin washer ...then re-beadblasted.
Some serious polishing to do over Christmas break :)
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
AshimotoK0:
Tank and panels prepped for sending to Menno in Germany. Bryan is kindly selling me a RH NOS side panel in green.
[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]
AshimotoK0:
Original seat pan fooked see pic.
Bought one from DK with supposedly good foam and pan but foam had the remains of a mouse nest in it and pan after blasting looks great on the underside but serious corrosion on the foam side. Complained to DK and they said bin the one they sent me and they will try to find me a better one. Nothing back yet from them though.
DK PAN
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
FOOKED ORIGINAL SEAT PAN
[ Guests cannot view attachments ]
Woodside:
Is the pan completely fubard. ...
Have you not a potion in your arsenal you could coat it with...to contain all the crud ..kind off gel coat to keep it contained .
.
I'm following this thread closely as I have a UK Registered k0 in bits and I'm considering what's the best route to take with it..I'm slowly collecting the parts and seeing how you are marching forward at an outstanding rate is tipping me to dig it out and start it. ...or at least piece it together ...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version